MAGNASTANDARD™150 sewage system
MAGNASTANDARD™200 sewage system
Range of packaged units for collection and automatic pumping of foul water or groundwater.
- Polyethylene tank requires site drilling for connections to suit application.
- Supplied with pedestrian duty cover. Can be adapted for roadway applications using covers by others.
- Vertical output: 8–12.5 m.
- Horizontal output: 70–150 m.
- Flow rate (maximum): 180–450 L/m.
- Requires 230V AC fused electrical supply.
- Requires level concrete base and concrete backfill.
More about MAGNASTANDARD™200 sewage system
Product reference: |
MAGNASTANDARD™200 sewage system . |
Type: |
[Magna 150 Standard] [Magna 200 Standard] [Magna 360 Pro] [Magna 360 Pro Twin] |
Access cover: |
[As supplied] [2903, locking, inlay, 600 x 450 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [7070, locking, heavy duty, 600 x 450 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [Cover specified elsewhere, with ___ mm thick overslab] - Maximum 300 mm slab depth. |
Pipe: |
[3078, MDPE pipe] - For Magna 150 Standard. [3081, 63 mm MDPE pipe] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. |
Alarm: |
[2130, high water level alarm] - Mains operated. For Magna 150 Standard or Magna 200 Standard. [4053, high water level alarm] - Mains or battery operated. For Magna 150 Standard, Magna 200 Standard. |
Accessories: |
[1205, kiosk control panel housing] - For Magna 360 Pro or Magna 360 Pro Twin. [8001, rubber wall seal 110 mm] - For Magna 150 Standard, Magna 200 Standard, Magna 360 Pro or Magna 360 Pro Twin. [9089, rubber wall seal 110 mm] - For Magna 150 Standard or Magna 200 Standard. |
Standard Product Features
General:
- Vertical output (maximum): 11 m.
- Horizontal output (maximum): 100 m.
- Flow rate (maximum): 600 L/m.
- As standard: 9018 tank, 2900 access cover, 4088 pump, 9067 nonreturn valve, 9070 gate valve, 3094 compression fitting, 8001 rubber wall seal, 50 mm rubber wall seal
- 50 mm cable duct connector. 50 mm vent duct connector.
- Internal dimensions (w x l x h): 700 x 550 x 900 mm.
- External dimensions (w x l x h): 850 x 700 x 1050 mm.
- Discharge: 63 mm.
- Submersible pump: 7.3 A, 1100 W.
Installation:
- Base: 200 mm consolidated hardcore. 150 mm mass concrete, grade 25 (minimum), to suit ground conditions.
- Discharge pipe connector: Use with MDPE (medium density polyethylene), or HDPE (high density polyethylene) discharge pipes.
- Vent duct connector: Provide vent to atmosphere (without valve) where incoming waste is not vented.
- Requires concrete backfill after installation.
- Where a concrete overslab is used, it should be designed to distribute applied loads away from the tank.